Hycom EasyGrab 600ml Adhesive Foil
• This product specifically needs a 600ml applicator gun
• A high quality, single component, high strength adhesive.
• Suitable for both PVC & Stainless Steel products.
• Very high grab – no support normall needed during cure.
• Based on MS-Polymer, chemically neutral and fully elastic.
• Safe to use - No isocyanates, halogens, acids, alkalis or solvents.
• High bond strength on nearly all surfaces.
• Highly resistant to all weathers, sea water, etc.
• Excellent adhesion on porous surfaces, PVC and GRP.
• High performance mechanical properties.
• Flexible elastic rubber – movement accommodation up to 25%.
• Straightforward application even in adverse conditions.
• No bubble formation within sealant (in high temperature and humidity applications).
• Primerless adhesion (except where capillary water pressure can occur).
• Very easy to tool and finish.
• Colour stability and UV resistant – does not yellow.
• Ecological advantages – free of isocyanates, solvents, halogens and acids.
• Over-paintable with all water based paints and many other systems.
• Resistant to many chemicals.
• No staining of porous materials such as natural stone, granite (for marble please test a small area first).
|Coverage||1.5m2 - 2 needed per 2.5m sheet, 2.5 needed per 3m sheet|
|Budget per m2||0-£5|